 | Lightweight Tranny Case 1deg
$60.00 |
| Made in the USA Machined from billet 6061 aluminum Lightweight design Works great for racing Now includes FLM20700 Motor Guard Includes everything pictured plus all mounting hardware 1 degree toe in arm mounts Requires slight mod to stock Rustler chassis Weighs 100 grams |
 | Sealed Diff
$45.00 |
| Made in the USAMachined from billet 7075 aluminum.Hardened steel gear.Adjustable fluid filled diff.O-rings have been machined on each surface to prevent fluid loss. |
 | Lightweight Tranny Case 4deg
$60.00 |
|
Made in the USA
Machined from billet 6061 aluminum
Lightweight design
Works great for racing
Now includes FLM20700 Motor Guard
Includes everything pictured plus all mounting hardware
4 degree toe in arm mounts (works best for racing)
Requires slight mod to stock Rustler chassis
|
 | Rear Adjustable Arm Mount 1 deg
$15.00 |
| Made in the USACNC Machined from billet 6061 aluminum1 degree toe inStock replacement for nitro, also for FLM tranny case |
 | Rear Adjustable Arm Mount 4 deg
$15.00 |
| Made in the USACNC Machined from billet 6061 aluminum4 degree toe inStock replacement for nitro, also for FLM tranny case |
 | Slash Chassis
$71.00 |
| Machined out of billet 6061 aluminumStock replacement chassisBattery is held in place by one velcro strapIncluded in the kit: 2.00" foam strip w/ adhesive back (to cushion battery)Retains all stock components, no modification necessary |
 | Front Arms
$18.00 |
| CNC Machined from billet 6061 aluminum.High strength design to resist bending.Multiple shock positions.Stock replacement: pin to pin 2.875 inchesRecquires modification to stock or aftermarket caster block (drill out hinge pin hole to 1/8") Direct fit for FLM caster blocks |
 | Front Bulkhead
$27.00 |
| Made in the USAMade from billet 6061 aluminumSolid one piece unitLightweight designDurableDirect replacementAll mounting hardware included |
 | Front Skid Plate
$8.00 |
| Made in the USAMachined from billet 6061 aluminum3.2mm thickDirect replacement |
 | Front Shock Tower
$15.00 |
| Made in the USACNC machined from billet 6061 aluminumStock replacement6.35 thick for extreme dutyMultiple shock positionsIncludes all necessary mounting hardware |
| | Rear Arms
$24.00 |
|
CNC Machined from billet 6061 aluminum.
Mutiple shock positions.
Stock arm replacement
Pin to pin 3.35
|
 | Stock Arm CVD Kit
$48.00 |
|
Machined from a high strength steel.
Heat treated for maximum strength.
Fits stock 2wd Slash and Slash 4X4 rear
Now 30% lighter
Lifetime warranty against breakage.
Complete kit
|
 | Rear Bearing Carriers
$18.00 |
|
Made in the USA
Machined from billet 6061 aluminum
Includes all necessary hardware for an easy installation
Uses 11x5x4mm bearing
|
 | Electric Caster Block
$18.00 |
|
Machined from billet 6061 aluminum
Stock replacement
Recquires modification to stock arm (needs to be drilled to 1/8") direct fit with FLM arms.
|
 | Draglink
$7.50 |
|
6061 Aluminum drag link for Electric Rustler.
Compatible with VXL trucks.
|
 | Bell Crank
$20.00 |
|
CNC Machined from billet 6061 aluminum
Increased durability
|
 | CVD Install
$0.00 |
| Basic CVD Install |
 | E Stampede Chassis
$45.00 |
| Made in the USACNC Machined from billet 6061 aluminumStock replacement6.35mm thickIncludes all necessary mounting hardware |
 | Extended 1/8 Super Chassis
$55.00 |
| Made in the USACNC Machined from billet 6061 aluminumStock replacement8.25mm thick50.8mm longer than stockIncludes all necessary mounting hardware |
