Home » FastLane Machine Parts

 
  
Manufacturer Fast Lane Machine
Part# FLM16040

T-Maxx Lightweight Chassis


List Price: $100.00

You save $25.00
Price: $75.00

Out of Stock

« Previous | Next »


  • Designed for severe duty.
  • Chassis is machined out of billet 6061 aluminum for durability and strength.
  • 6mm thick. Predrilled for Fast Lane's 3 point chassis brace.
  • Threaded mount for steering servo. Pockets milled for bulkheads, so the center of gravity is not raised.
  • Includes all necessary hardware with standoffs to mount the reverse servo.
  • Fast Lane's extreme abuse warranty.
  • Replacement cost per chassis $17.00. This chassis was designed for the racer and the basher.
  • With its extremely lightweight and extra thick (twice as thick as the stock one) frame, this chassis can make itself at home with any Maxx.
  • Stock chassis weight: 224 grams
  • Fast Lanes: 186 grams
 
Product Reviews

No Reviews For This Product.

Click to review this product

Bulkhead Braces (Front & Rear)Bulkhead Braces (Front & Rear)
$18.00
CNC Machined from billet 6061 aluminumStock replacementCustom look
 Lower Suspension Arm
$29.00
These arms were designed for those who like to race.With their adjustability to lower your truck farther than any other arm without sacrificing shock travel, these arms are great for those who race.Not only are they for the racer but the basher can take full use of its features also.Includes an exclusive pin brace to nearly eliminate front lower pin from bendingWorks best in conjunction with FLM s...
Upper Suspension Arm (pair)Upper Suspension Arm (pair)
$29.00
Made in the USAMade from the finest 6061 T6 Aluminum.These A-Arm sets are very durable and easy to install.These arms are sold in Pairs.2 are needed to complete the truck.
Hinge Pin Kit (steel)Hinge Pin Kit (steel)
$12.00
Made in the USAMachined from high strength steelStock bulk upgrade
FLM Bulk Hinge Pin Kit (steel)FLM Bulk Hinge Pin Kit (steel)
$12.00
Machined from high strength steelStock bulk upgrade
Front Skid PlateFront Skid Plate
$14.00
CNC Machined from billet 6061 aluminum Lightweight design
Rear Skid PlateRear Skid Plate
$12.00
Made in the USA CNC Machined from billet 6061 aluminum Lightweight design
Chassis BracesChassis Braces
$30.00
CNC Machined from billet 6061 aluminum These fit older versions of the T and E-maxx Direct replacement
Transmission Skid PlateTransmission Skid Plate
$7.50
CNC Machined from billet 6061 aluminumFits older T and E-maxxs with stock or FLM chassis bracesAlso work on FLM Chassis kits (T and E-maxx)
 Throttle Servo Mount
$12.00
 CNC Machined from billet 6061 aluminum Stock replacement Fits all T-Maxx models
 Motor Mount
$18.00
 CNC Machined from billet 6061 aluminum Direct replacement for all T-maxx models
 Front Driveshaft Kit
$21.00
CNC Machined from high strength steel Extreme duty drive cups Includes front drive cup and brake cup for 3.3 style brakes
Front BulkeadsFront Bulkeads
$38.00
Made in the USACNC Machined from the finest 6061 T6 Aluminum.These Bulkheads are as strong as they are great looking!Lightweight designFits all Maxx modelsIncludes lower arm pin
Front Combo BulksFront Combo Bulks
$60.00
Made in the USA CNC Machined from billet 6061 aluminum Increases strength to entire bulkhead section This bulk accepts the older Maxxs, Traxxas part# 4981 diff gear Diff case and bulk are machined into one unit Includes lower arm pin
Front Hybrid BulkFront Hybrid Bulk
$75.00
Made in the USA CNC Machined from billet 6061 aluminum Increases strength to entire bulkhead section This bulk accepts 1/8 scale style diffs (ring gear must be less the 1.500 inches) Diff case and bulk are machined into one unit Includes lower arm pin
Rear Bulkead setRear Bulkead set
$38.00
Made in the USAMade from the finest 6061 T6 Aluminum.These Bulkheads are as strong as they are great looking!Lightweight designIncludes lower arm pin
Rear Combo BulkRear Combo Bulk
$60.00
Made in the USA CNC Machined from billet 6061 aluminum Increases strength to entire bulkhead section This bulk accepts the older Maxxs, Traxxas part# 4981 diff gear Diff case and bulk are machined into one unit
Rear Hybrid BulksRear Hybrid Bulks
$75.00
Made in the USA CNC Machined from billet 6061 aluminum Increases strength to entire bulkhead section This bulk accepts 1/8 scale style diffs (ring gear must be less the 1.500 inches) Diff case and bulk are machined into one unit Includes lower arm pin
Adjustable Shock TowerAdjustable Shock Tower
$24.00
20 adjustable positions from racing to bashing!CNC Machined from billet 6061 aluminum3/8 thick for extreme abuseAdjusts an additional .500 than previous designTowers has been machined to accept GS Storm and Hot Bodies Lightning  wing mountThese shock towers were designed for those who want the most out of there Maxx.
LST2 shock conversionLST2 shock conversion
$12.00
Made in the USAMachined from billet 6061 aluminumUse LST2 shocksRecquires mod to stock towerDirect fit for FLM towers
3905 Diff Cup with Modified Traxxas Gear3905 Diff Cup with Modified Traxxas Gear
$32.00
Machined from billet 7075 aluminum diff cup Screw size is increased to 3mm for durability Direct replacement Includes aluminum drive cup and modified stock gear
Hyper ChassisHyper Chassis
$120.00
Made in the USA Designed for severe duty. Steel Drive Shaft included Chassis is machined out of billet 6061 aluminum for durability and strength. 6mm thick. 4 point chassis brace system. Accepts .21 size engine or small block Relocated throttle servo mount, for inline throttle operation. Pockets milled for bulkheads, so the center of gravity is not rai...

Be Sure To check Out These Other Related Items:
» The Rocker Rear Shock Tower» Magura Clutch Cover "KTM" logo
» Front Shock Tower» Stock Driveshaft Kit
» SD Driveshaft Rebuild Kit» Upper Suspension Arm (pair)
» Front Arms» Brembo Brake/Clutch Cover "F" logo
» Brembo Brake Bling Kit "F" Logo» 20mm Chain Adjuster Block
» Chassis Brace Kit (blue anodize)(L5t)» XL Drive cups
» HD Driveshaft (142mm c-c)» 2 stroke Oil Fill Plug
» Hyper Chassis